USED TANNEWITZ VERTICAL PLATE CUTTING BANDSAW
WITH PROGRAMMABLE CONTROLS
MODEL 3000-MH8 ♦ YEAR 1993
Stock No: 8963
Specifications:
Capacities:
Throat:30”
Maximum under guide:8”
Maximum longitudinal:144”
Maximum width (with
programmable feed):48”
Remnant length:2”
Feed rate:½ to 25 ipm
Feed pressure:Variable 50 to 300 lbs
Blade speeds:Variable 55 to 350 sfm
Blade width range:Minimum 1” to 2” maximum
Blade length:17’
Bandsaw blade drive:5 HP, 240/480 volt (currently wired at 240 volt)
Gear ratio:86.5
Blade wheels:2 – 30” diameter all steel with Tannewitz “speed change” rubber tires
Bridge clamps:(6) six hydraulically actuated clamps
Coolant system:Pneumatically assisted
Hydraulic system:5 HP, 15 gpm, hydraulic pumps and reservoir to JIC spec.
Feed table dimensions:60” wide x 156” long
(weight capacity: 12,000 lbs)
Approximate floor space requirements:244” L x 161” W x 93” H
Approximate weight:14,000 lbs.



Features and Equipment:
•Complete automated, programmable saw for cutting steel plate
Will accommodate carbide tipped blades
•Fully hydraulic blade tensioning (35,000 PSI)
•Blade breakage shutoff
•Powered chip brush
•Hydraulic blade guide positioning
•Reliance variable speed blade drive system
•AccuLube Mist Lube System
•All steel Tannewitz guides with carbide jaws (adjustable
to accommodate blade widths from 1”-2”)
•Cutting head travels on hardened Thomson round ways with
master rail mounted to the table
•Electronically controlled ball screw driven indexing for
exceptional repeatability of 48” maximum cut widths
•DX indexing system for maximum productivity provides for:
o(3) Hydraulically actuated rear clamps that hold the plate
during indexing
oRe-programming during any cut or after the last program
oProgrammable cut off widths
oProgrammable number of pieces
oProgrammable multiple jobs

Other Features:
•JIC Hydraulics & Electrics
•Rapid Head Return
•Jog Control for Manual Material
•End of Cut System Shut Down

Operator/Management Controls:
•Machine Control Read Outs
•Blade Speed in SFPM
•Traverse Rate in Lin In/Min
•AMP Meter
•Feed Press Gauge in PSI
•Material Clamping at Blade Line

Westbrook Engineering Co Inc
23501 Mound Rd Warren MI 48091-2048
Tel: 866-FOR-SAWS Fax: 586-759-3106
Email (Request Quote): info@westbrook-eng.com
Web: www.westbrook-eng.com