SPECIFICATIONS:
MAX. DIAMETER GROUND....................................... 18"
MAX. DISTANCE BETWEEN CENTERS.............................. 74.54"
GRINDING WHEELHEAD:
SWIVEL RANGE - LOWER SWIVEL, RIGHT & LEFT.................. 90 DEGREES
UPPER SWIVEL, RIGHT & LEFT.................. 30 DEGREES
GRINDING WHEELS REGULARLY SUPPLIED (DIAMETER X FACE X HOLE) 14" X 1 1/2" X 5"
14" X 1" X 5"
CROSS FEED:
AUTOMATIC INFEED AT TABLE REVERSAL (DIAMETER REDUCTION).... 0.0002" - 0.005"
PICKFEED SELECTIONS: RIGHT END ONLY, LEFT END ONLY......... YES
RIGHT AND LEFT ENDS................... YES
**WHEELHEAD MOVEMENT PER TURN OF CROSSFEED HANDWHEEL: LOW.. 0.050"
HIGH. 0.200"
MINIMUM INFEED INCREMENT IN TERMS OF DIAMETER REDUCTION.... 0.000050"
HEADSTOCK & FOOTSTOCK:
RANGE OF WORK ROTATION SPEEDS (+/- 10% ALLOWABLE INF. VAR.) 3 - 200 RPM
ACCURACY OF TABLE REVERSAL AT ALL TRAVERSE RATES........... 0.004"
INDEPENDENT RIGHT-HAND AND LEFT-HAND TARRY ADJUSTMENT...... 0 - 5 SECONDS
MECHANICAL HAND TABLE TRAVERSE PER REV. OF HANDWHEEL: RAPID 15/16"
SLOW. 0.2"
POWER REQUIREMENTS:
WHEELHEAD MOTOR............................................ 5 HP
HEADSTOCK MOTOR............................................ 1 HP
INTERNAL GRINDING ATTACHMENT MOTOR......................... 2 HP

HEIGHT OF MACHINE.......................................... 65.75"
FLOOR TO SPINDLE CENTER.................................... 45.75"
MAX. DISTANCE BETWEEN CENTERS.............................. 74.54"
OVERALL LENGTH............................................. 118"

**DUAL RATIOS FOR CROSSFEED HANDWHEEL APPLY TO STANDARD MECHANICAL
MACHINE ONLY

EQUIPPED WITH:
SWING DOWN INTERNAL ATTACHMENT
SWING DOWN INTERNAL ATTACHMENT MOTOR (NO INTERNAL SPINDLE)

SPECIFICATIONS SUBJECT TO VERIFICATION

T R Wigglesworth Machinery Co
7100B Krick Rd Bedford OH 44146-4418
Tel: 440-232-6660 Fax: 440-232-5541
Email (Request Quote): leads@wigglesworth.com
Web: www.wigglesworth.com