TABLE DIAMETER: 63"
MAXIMUM SWING: 78.8"
MAXIMUM HEIGHT TOP OF TABLE TO BOTTOM OF RAM: 53"
MAXIMUM CUTTING HEIGHT: 45.3"
MAXIMUM CUTTING DIAMETER: 78.7"
MAXIMUM LOAD ON TABLE: 11,000 LBS.
TRAVELS:
HORIZONTAL TRAVEL OF RAIL HEAD; -31.7", +44.1"
VERTICAL TRAVEL OF RAM; 31.7"
VERTICAL TRAVEL OF CROSS RAIL; 19.7"
TABLE SPEEDS (2 RANGES): 1.6 TO 280 RPM
MAXIMUM TABLE TORQUE: 15,900 FT-LBF
MILLING SPINDLE SPEEDS: 12.5 TO 1,500 RPM
FEEDRATES:
X-AXIS 472 IPM RAPID/0.1 TO 78.7 FEED
Z-AXIS 315 IPM RAPID/0.1 TO 78.7 FEED
C-AXIS 800 DEGREES PER MINUTE RAPID/11.8 DEGREES PER MINUTE FEED
AUTOMATIC TOOL CHANGER CAPACITY (ATC)--24; 8 FOR TURNING/16 FOR MILLING
TAPER IN RAM: NO. 50
SECTION OF RAM: 8.66" X 8.66"
TABLE DRIVE MOTOR: 60/50 HP
MILLING SPINDLE DRIVE MOTOR: 20/14.7 HP
POWER REQUIREMENT: 200/220 VOLTS; 100 KVA
FULL "C" AXIS WITH LIVE MILLING SPINDLE
AUTOMATIC TWO PALLET CHANGER (APC)
24 TOOL CAPACITY AUTOMATIC TOOL CHANGER (ATC)
TURNING AND MILLING TOOL HOLDERS
CHUCK TOP JAWS
(2) 63" DIAMETER CHUCKS
COOLANT TANK AND PUMP
MAYFRAN CHIP CONVEYOR RECENTLY INSTALLED
ATC TOOL HOIST
TOOL MEASUREMENT PRESETTER
FANUC 15 TA CNC CONTROL
CONDITION: GOOD; INSPECT UNDER POWER
WEIGHT: 72,200 POUNDS
FLOOR SPACE: 313" X 288" X 220" HIGH (RAIL AND RAM IN UPPERMOST POSITION)
CONDITION: GOOD; INSPECT UNDER POWER

Machinery Resources Int'l Inc
1650 Voyager Ave Simi Valley CA 93063
Tel: 877-568-2121 Fax: 818-346-7986
Email (Request Quote): inquiries@machineryresources.com
Web: www.machineryresources.com