Standard Specifications
Maximum coil weight - 20,000 Lbs.
Maximum coil width - 36 Inches
Maximum coil outside diameter - 72 Inches
Minimum coil outside diameter - 36 Inches
Coil ID expansion range - 19.5-24.5 Inches
Maximum stock thickness @ 36 inches (60 ksi) - .200 Inches
Maximum stock thickness @ 18 inches (60 ksi) - .350 Inches
Minimum stock thickness at any width 0.070 Inches
Material yield strength range 32-90 KSI
Payoff rate 0-100 FPM
Fastener Units US Standard
Pressure Units US PSI
Paint Beige / Safety Yellow
Voltage (Supply) 480 V / 3 Phase / 60 Hz
Voltage (Control/Valves) 24 VDC

Components -
CHS Automation Single End Centering Reel #R200 Series
Three pad mandrel assembly
Coil width scales recessed into mandrel leafs
Heavy duty wedge type expansion with dove-tail key arrangement
Operator pressure gauges and regulators
Kobelt "Caliper" braking system with 2 drag brakes and 1 fail safe brake
Front and rear adjustable keeper arms
Full enclosed, complete hydraulic system
Hydraulic expansion of mandrel assembly
Hydraulic threading drive for jog forward and reverse
Centralized control station on straightener
Remote pendant control with curly cord for jog forward and reverse
Clock spring safety guard (protects isle from coil from clock-springing)
Auto tension adjustment
Traveling load car model no. LC-200
Narrow coil supports (anti-tip arms) for coil load car
6 button loading pendant
Coil hold-up arm - hydraulic

CHS Automation - PS500-HD Powered Straightener
Model No. PS500-7-36-HD
5.0" diameter straightening rolls
15 ton screw jacks
Two sets of 6.4" diameter pinch rolls (Exit and Entry)
Coating of all pinch rolls - Max Grip Matte Chrome Blast #3
Hydraulic operated pinch roll raise and lower
AC Variable frequency drive package
Centralized operator control station (on straightener)
Remote pendant control with curly cord for jog forward and reverse
Centralized lubrication system (manual lube)
Scales and pointer for roll height adjustment
Individual roll height adjustment of straightening rolls
Scales and pointer for edge guide adjustment
Three roll loop support section
Double roll individual or simultaneous adjusting edge guides via hand crank
Laser loop control system
Peeler-Threader-Hold Down Station (PTH)
Hydraulic operated raise and lower of hold down unit
Hydraulic operated material funneling hold down roll
Hydraulic operated raise and lower of peeler table
Pneumatic operated peeler blade extension
Hydraulic motorized neoprene coated end wheel
Powered threading assist roll (hydraulic)
Tie brackets for conjoining reel and straightener
Double row back-ups of upper and lower straightening rolls
Auto lubrication system with timer and low oil indicator
Platen-type coil end debender (hydraulic)
Individual roll height adjustment of straightening rolls (Hyd Motorized)
End of stock detector for automatic shut-off
Touchscreen control system

S & G Press & Machinery Sales
PO Box 537 Fraser MI 48026-0537
Tel: 586-563-5000 Fax: 586-563-5005
Email (Request Quote): sales@sandgpress.com
Web: www.sandgpress.com