Processing Machine Specifications
Machine Structure: X/Y Precision Rack & Pinion - Z=Precision Ball Screw
Travel Drive Method: X-Y-Z simultaneous 3 axes (Z-axis height control is also

possible)
Maximum Workpiece Size: 120.1" x 60.0"
Table Pass Height: 34.6"
Processing Access: Automatic up/down door
Pallet Changer: Provided
X-axis Stroke: 122"
Y-axis Stroke: 61"
Z-axis Stroke: 5.9"
Rapid Travel Speed (X,Y) inches per minute: 3940/5550 simultaneous
Maximum Processing Federate, inches per minute: 1970
Positioning Precision: 0.0019/20 (X,Y), 0.0039/4 (Z)
Drive Motor Type: Intelligent AC servo
Maximum workpiece weight: 1540 lbs.

Control System Specifications
CPU: 64-bit
Display Screen: 15" TFT color LCD touch screen
Hard Disk: 20.0 GB
Generator Output Control: Output power, frequency, duty
Generator Operation Control: Beam on/off, laser gas charge, etc.
Drive System: X,Y,Z simultaneous control
Position Detection System: Encoder
Minimum Command Input: 0.001 mm / 0.001"
Program Input System: USB Computer Link, ethernet LAN

Pallet Changer Specifications
Drive Mechanism: Chain
Pallet Change Time (Sec.): Approximate 30
Work Clamps: 2 sets on Y Axis
Pallet Capacity: 1540 lbs.
Applicable Machine Size: 3015 (5' x 10')

CO2 Laser Specifications- 45CF-R
Excitation Method: 3-axis cross flow, silent discharge
Maximum Output Power: 4500-watts
Rated Output Power: 4500-watts
Control Method: Power feedback
Power Stability: Less than +/- 1 % of rated power
Beam Mode: Low-order
Beam Outer Diameter: 1.02
Beam Divergence (mrad): Approximately 3.5 of less total angle
Las Gas Composition (CO2:CO:N2:He): 8:4:60:28
Laser Gas Consumption Rate (liter/hour): 24 during continuous oscillation
Wave Length: 10.6 microns
Frequency Setting Range: 10~3000 Hz
Duty Range: 0~100 percent adjustable
Output Power Adjustable Range: 0~100 percent
Equipped With
Chiller
Dust Collector

Jordan Craig Machy Int'l LLC
PO Box 737 New City NY 10956-0737
Tel: 845-398-0073 Fax: 845-398-0074
Email (Request Quote): jc@jordancraigmachinery.com
Web: www.jordancraigmachinery.com