AGE: 1975


SPECIFICATIONS:

Finished Width: 38" to 39" (Depending On Width Of Blank
Used: 40.5" to 41.375")
Total Coverage For Use Of Each Panel: 36"

Runs: 80 to 95 FPM

Electrics: 440/60/3

CONSISTING OF:

=20,000 Lb. Model BKU-M1-01 Uncoiler:

= =Age: 1975

= =Coil I.D.: 18-1/2" to 21-1/2"
= =Width: 42"

= =Hydraulic Expansion
= =Hydraulic Sliding Base
= =Air Brake
= =Hydraulic Rotation

= =Motor Data: 7.5 HP, 480 Volt

14-Stand B & K Model 2B-11 Roll Former:

Note: This is a 16 Stand Base

All Uppers are Idled (no gears or links)
Spindle Diameter: 3-1/2"
Roll Space: 42"
Vertical: 4-1/2" to 9-1/2"
Horizontal: 16"
Center Bottom Shaft To Bed: 7 1/2"
Width of Bed, Face of Gear Boxes to Outer Edge: 52"

EQUIPPED WITH:

Three Jog/Stop Electrical Boxes Along the

Front of Base
WER Industrial D.C. Variable Speed Drive
Rotary Encoder for Measuring and Cutting to Length

CONDITION: Good - All 14 gear box photos are Available
Spindles Have no Tooling Impression Marks

Motor Data: 30 HP, 230/480/60/3
O.A.D.: 102" x 291" x 58" high

=60 Ton B & K Model 4P-16-01 Flying Cut-Off Press:

AGE: 1975

= =4-Post Under Driven, SN 101
= =Capacity: 60 tons at 1/4" Off Bottom
= =Stroke: 3"
= =Shut Height: 11-1/2" to 14-1/2"
= =Cuts Per Minute: 30
= =Between Posts: 18" x 52"
= =33" Floor to Top of the Bed
= =Air Clutch & Brake

= =Induction Motor Data: 15 HP, 230/460/60/3, 1175 RPM

EQUIPPED WITH:

=Flying type Cut-Off Die
=AC Vari-Speed Drive With DC Clutch
=Control Panel & Batch Input
=Simultaneus 4-post Shut Height Adjustment

OVERALL DIMENSIONS: Uncoiler - 10' x 5' x 6'6" High
Hydraulic Unit - 3' x 4' x 3' High
Roll Mill - 24' x 8' x 5' High
Cut-Off - 9' x 5' x 5'6" High
Control Panel - 5' x 2' x 5' High

36' Long (Uncoiler to Shear Cut-Off Press)

WEIGHT: Uncoiler - 9,000 Lbs.
Hydraulic Unit - 2,000 Lbs.
Roll Mill - 30,000 Lbs.
Cut-Off - 8,000 Lbs.
Control Panel - 1,500 Lbs.

CONDITION: Good, As Removed Directly from Service

Bass Machinery
2100 Hendon St Toledo OH 43606-4543
Tel: 419-243-2277 Fax: 330-299-0520
Email (Request Quote): sales@bassmachinery.com
Web: www.bassmachinery.com