SPECIFICATIONS:

Thickness: .015" to .135"

Coil Weight, Max.: 30,000 Lb.
Coil I.D., Entry: 16" with Leaves for 20" to 24"
Coil I.D., Exit: 16" and 20" Diameter Drums
Coil O.D.: 72"

Material: Cold Rolled, Hot Rolled Pickled and Oiled Steel,
Coated Steel, Aluminum Brass and Copper

PSI: 30,000 to 80,000

Speed, Max.: 800 FPM

Slit Mult Width, Min.: 1"

Line Directions: Right-to-Left

CONSISTING OF:

(2) Coil Storage Platform
(2) Coil Storage Platform with Floor Type V-Deck Coil Car

Stamco Mandrel Uncoiler:


4-Leaf Mandrel Design
Hydraulic Expansion
Sliding Base
Motor Data: 75 HP DC

Free-Standing Powered Hold Down Roll



Peeler Table

Polyurethane Covered Pass Line Rolls

3-Roll Coil Set Deflector Rolls:


Roll Face: 55"
Motor Data: 162 HP AC

Powered Pinch Rolls:

Motor Data: 3 HP AC

(2) Stamco Slitting Heads:

Arbor Face: 53-1/2"
Arbor Diameter: 7-1/2"
Crane Removal Design
Motor Data: 150 HP DC Baldor
Nutall Gearbox 7.814:1

Dual Scrap Choppers:

Scrap Conveyor
Motor Data: Dual 20 HP DC Reliance

Powered Pinch Rolls:

Motor Data: 3 HP

Cascade Rolls:

Pit Cross Over Table
Over Arm Separator Shaft
Synchrowind Combination (Roll Type-Pad Type)
Tension Stand
Width: 60"
Motor Data: 100 HP DC Reliance
2-Speed Horsburg & Scott Reduction Gearbox:

23.67:1 and 11.49:1

Exit Pass Line Rolls

Herr Voss Exit Crop Shear:

Downcut Design
Thickness: .015" to .135" Aluminum
Shear Strength, Max.: 50,000 PSI

Herr Voss Free-Standing Over Arm Separator:


Coil I.D., Min.: 20"
Coil O.D., Max.: 50"
Speed: 800 FPM

Stamco Recoiler:

Coil I.D.: 20"
Coil O.D.: 72"
Mandrel Width: 54"
Full Hydraulic Drum
Hydraulic Push-Off
Motor Data: 150 HP DC Reliance, 500 to 2000 RPM
2-Speed Gearbox, 10.37:1 and 20.32:1
Spare 16" I.D. x 54" Face Drum

60,000 Lb. Herr Voss L-Type Exit Coil Car:


Plastic Coil Keepers

Herr Voss Free-Standing Coil Keeper/Hold Down Roll:


Width, Max.: 50"
Coil O.D.: 72"
Coil Weight, Max.: 40,000 Lbs.

Allen Bradley 1395 Drives
Allen Bradley PLC

Complete Line with Shimless Tooling, Knives, Metal Spacers,
Hydraulics, Electrics, Controls, Manuals and Drawings

Installed

Bass Machinery
2100 Hendon St Toledo OH 43606-4543
Tel: 419-243-2277 Fax: 330-299-0520
Email (Request Quote): sales@bassmachinery.com
Web: www.bassmachinery.com