COIL CAPACITY: 42" Wide x 0.010"- 0.125" Gage Thickness
AGE: New 1980's

SPECIFICATIONS AND DESCRIPTION:
Note: These coil processing components were previously used in a 'coil
coating line' operation which was processing coils: 36"-42" W x .045"
thickness coil set up on a reel to reel line 'left to right' direction
of flow. The line paramaters were as follows:
Materials Processed: (Coil stock): Steel, Galvanized Steel,
Aluminized Steel & Aluminum
Line Capacity: 8.8 Tons/hr (19,360 pds/hr) / 770 lbs @ 40" x 175 FPM
(0.35 mt x 914 x 53 m/min)
Annual Line Production Capacity (40 hr/wk) 60,000 TPY (approximately)
Line Production Speeds: Entry & Delivery Sections: 40 - 175 fpm /
(12-55 m/min)
Coil Capacity Data: Max coil weight: 11,000# (5000kg)
Max Coil Width: 24" - 42" (610-1060mm)
Max coil ID @ Entry & Delivery: 20" Payoff (508mm)
Material thickness range: 0.004" - 0.045" (0.198 - 1.00mm)
Coating capability: Single side or dual side in one pass thru

Line Components & Equipment / dimensions are approximate:

(1) Surface Pretreatment Unit / 5-Station Washer / OAL: Approx: 120'
Treatment Adjusting Zone - (4) station which includes:
Station #1: Hot Water Wash - length of tank: 15'-6" / OAL: 60'
Station #2: Oil Washing & Conversion rinse - length of tank: 4'-0" /
OAL: 12'
Station #3: Hot Water Wash - length of tank: 13'-0" / OAL: 28'
Station #4: Oil Wash & Air Clean rinse - length of tank: 4'-0" /
OAL: 8'
Station #5: Final Rinse - Ambient - length of tank: 4'-0" / OAL: 8'
Tanks & upper housing - mostly SST -

Drying Furnace/Oven: Gas heated / OAD: 20'L x 9'H x 5'W
Circulating Hot Air Heat Zone
Spray type hot air circulation, Gas Fuel
Insulated, interlocking panel construction: 6" thick

Curing-Baking Furnace - Gas heated / 2 Zone: 75' OAL (approx)
Hot Air Re-circulation - Gas type fuel -
Zone #1: 53" W x 86" H x 24' L (approx)
Zone #2: 53" W x 86" H x 45' L (approx)
Gas Operated - recirculated hot air chamber -
Heat chamber is followed by a Hi-Velocity Flotation Air Cooler Chamber
- Approx 10' L (working length)

Other Line components available as Options / open to Offer:

(1) First Quench Chamber - Follows dryer - Dimensions: approx 9' OAL
(1) Final Quench Chamber: Follows the Curing furnace & cooling chamber
/ Approx 11' OAL
(1) High Velocity Air Cooler unit
(1) Thermal Oxidizer Unit
(1) Waste heat Boiler Unit
(1) Water Cooling System: Upper Tank is Curtin Flow type - Lower Tank
is Spray type

CONDITION: Components are in generally good condition. Recently
removed from service, in heated warehouse storage - ready for
immediate release and delivery

Industrial Resources Inc
PO Box 505 Old Saybrook CT 06475-0505
Tel: 860-388-3439 Fax: 860-388-2740
Email (Request Quote): ray@industrial-resources-inc.com
Web: www.industrial-resources-inc.com