To the best of our knowledge all details listed below are deemed correct. It
          
          is the buyer's responsibility to confirm all details and we encourage an
          
          inspection of the machine(s) and accessories prior to purchase.          
          
          Equipped With:
             Haas Control 
             12" Color LCD
             10 Position Automatic Tool Changer
             Coolant System
             Table Chip Guards
             Rigid Tapping
             Green Work Indicator Light
             Manual / Electronic Handwheels
             Single or Three Phase Power
          
          General Specifications:
             X Axis:                                30" 
             Y Axis:                                12" 
             Z Axis:                                16" 
             Spindle Nose to Table:                 4" - 20" 
             Table Size:                            47.75" x 10.5"
             T-Slot Width:                          5/8 " 
             T-Slot Center Distance:                4.00 " 
             Number of Std T-Slots:                 3 
             Weight on Table:                       1000 lb 
             Spindle Motor:                         7.5 hp 
             Spindle Speed:                         4000 RPM 
             Spindle Torque:                        33 ft-lb @ 1200 rpm 
             Drive System:                          Direct Speed Belt Drive 
             Taper:                                 CT 40 
             Bearing Lubrication:                   Grease packed 
             Cooling:                               Air Cooled 
             Rapid Traverse Rate:                   200 IPM
             Cutting:                               400 in/min 
             Tool Diameter:                         (full)    3.5 " 
             Tool Weight:                           12 lb 
             Tool-to-Tool (avg):                    5.7 sec 
             Chip-to-Chip (avg):                    6.5 sec 
          
          Hours:
             Servo:                                 18,019
             Motion:                                6,650
             Spindle:                               6,172
          
          Machine Dimensions:                       85" x 64" x 109"
          Machine Weight:                           3,300 lbs
          
          
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): mike@automatics.com
Web: www.automatics.com