Model: CPO 350 LT
Year: 2015

Cutting Speeds Must Specify when Ordering
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall

pipe LT (Low Turn)
22 rpm / 44 rpm Motor rate: 3 hp
HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and

non-ferrous material HT (High Turn) 44 rpm / 88 rpm Motor rate: 2.5 hp
VS (Variable Speed) ~ wired 230/460, 3-ph VS (Variable Speed) 11 / 177 rpm

Motor Rate: 5 hp
VS (Variable Speed) ~
wired 220, 1-ph VS (Variable Speed) ~
11 / 177 rpm Motor Rate: 5 hp
SS (Single Speed) designed for 220v 1 ph applications SS (Single Speed) 44

rpm Motor Rate: 3 hp
TUBING
Round
Square

Rectangle


SOLID
Round
Square 90 Degree
4-1/2" (114 mm)
4-1/4" x 4-1/4" (108 x 108 mm)
5-1/2" x 4" (140 x 102 mm)

90 Degree
2" (51 mm)
2" x 2" (51 x 51 mm) 45 Degree
4" (102 mm)
3-3/4" x 3-3/4" (96 x 96 mm)
3-3/4" x 3-3/4" (96 x 96 mm)



45 Degree
1-3/4" (44 mm)
1-3/4" x 1-3/4" (44 x 44 mm)
Factory Wired Specify
208 3 ph
230 3 ph
460 3 ph
575 volt, 3 ph 60 hz
220 1-ph 60 Hz (SS Model only)
Maximum Diameter Blade 14" 350 mm
Arbor Bore 1-9/16" 40 mm
Pin Spacing 4/12/64
Width 21-7/8"
Depth 43-1/2"
Height not including handle 56-1/4"
Height from floor to vise 37-7/16"
Shipping Weight 660 lbs. (299 kg)





Standard Features:
Manual Double Self-Centering Vise Assures Burr Free Cuts
Miter Capabilities 45 Degrees Left and 45 Degrees Right

Miter Locking Device: Quick, Accurate Setting-Stops At 45 Degrees Left,

Straight 90 Degrees, and 45 Degrees Right.

Operator Controlled Trigger Switch
Capable of Slotting
Two Cutting Speeds
Double Reduction, Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
Chip Drawer
7 Gallon Coolant Tank With Pump
One 12-1/2" Diameter(315mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant


*See attached warranty, terms, machine use and safety.
**These specifications are subject to verification upon inspection.

Scott Machinery & Supply Inc
PO Box 430 Helena AL 35080-0430
Tel: 205-664-9644 Fax: 205-664-9796
Email (Request Quote): info@scottmach.com
Web: www.scottmach.com