Reference: 2853


Rebuilt Nilson Model 751 Four Slide Machine Serial Number 81410

Specifications;
Diameter Basic Wire 1/16 0.0625? (1.6mm)
Max. Width Metal Strip 3/4" 0.750 (19mm)
Standard Feed Length 3" (76mm)
Speed Range (Strokes per Minute*) 40 to 400
*Effective maximum material and tonnage, 50 to 300 SPM

Standard Slide Strokes
Front 0.750" (19mm)
Sides 1-1/4" 1.250(32mm)
Back 3/4" 0.750? (19mm)
Press Data (This machine equipped with two light duty press heads).
Stroke 3/16" 0.187? (4.8mm)
Die Set Length 4" (102mm)
Tonnage 2 Ton Combined
Related Data
Dim. Forming Opening in Bed 2-3/8" x 2-3/4" (60mm x 70mm)
Wire Line Height 41-1/2" (1054mm)
Floor Space Required 40" x 62"
Meters (1m X 1.6m)

New Motor 3 HP, 230/460 Volt, 3 phase Variable speed AC inverter
Approx. Shipping Weight: 1000 lbs. (453.6 kg)

Equipped with the following items;
a. Rebuilt Form Lifter
b. Split Cams on Form Lifter, Stripper, and Stock Check. Slides have Shell Cams (new cams not included)
c. Rebuilt Feed Block and Feed Assembly
d. New Electric Clutch and Brake
e. New Gears
f. New Slides
g. New Gibs
h. New Wear Plates
i. Rebuilt Cut Off Unit
j. Two Press Heads Rebuilt
k. Rebuilt Front Shaft Support
l. Rebuilt Stock Check
m. Rebuilt Strip Stock straightener (Single Plane 6 Roll)
n. New Electrics and Controls Mounted in a free standing Console,
With emergency stop circuit for safety equipment.
o. Hand Bar Safety Socket with electronic interlock.
p. New Stripper Lever




Optional Equipment- *

I. Light Curtain for Nilson Model 751 includes
1. Controller Extended Range
2. 24? Receiver/ Transmitter
3. Two Cables 15 Foot
4. Three 24? Mirrors

Hayden Machinery LCC
171 River St Thomaston CT 06787-1745
Tel: 860-283-6261 Fax: 860-283-8683
Email (Request Quote): sales@haydenmachinery.com
Web: www.haydenmachinery.com