MODEL: 9684520

UPC: 726896845203

LATHE SPECIFICATIONS
MOTOR: 1 HP / 115V / 60Hz / 1PH
CENTER HEIGHT: 5.51 in
MAX TURNING DIAMETER: 11.02 in
DISTANCE BETWEEN CENTERS: 27.56 in
SPINDLE SPEED: 150 - 2000 RPM
NUMBER OF STEPS: 6
SPINDLE TAPER: MT4
SPINDLE HOLE: 1.02 in
CHUCK SIZE: 5 in
BED WIDTH: 7.09 in
TOP SLIDE TRAVEL: 2.43 in
COMPOUND SLIDE TRAVEL: 5.60 in
DISTANCE BETWEEN CENTER AND COMPOUND TABLE: 3.49 in
TAILSTOCK TAPER: MT2
TAILSTOCK SLEEVE TRAVEL: 4.13 in
LONGITUDINAL FEED: .002 - .004 - .008 in
PITCH: 8 - 56 in
HEIGHT: 24.80 in
LENGTH: 54.72 in
WIDTH: 27.56 in
4 POSITION TOOL POST HEIGHT: 1/2 in
WEIGHT: 440.93 lb

MILL SPECIFICATIONS
MOTOR: 1 HP / 115V / 60Hz / 1PH
DRILLING CAPACITY: 0.63 in
MILLING CAPACITY OF END-MILL CUTTER: 0.79 in
MILLING CAPACITY OF INSERTED TOOTH CUTTER: 2.48 in
WORKING RADIUS: 7.28 in
SPINDLE HOLDING FIXTURE: MT2/M10
SPINDLE TRAVEL: 1.97 in
SWIVELLING: +/- 90 DEGREES
GEAR STAGES: 2
LOW RANGE: 100 TO 1500 RPM
HIGH RANGE: 200 TO 3000 RPM
Z-AXIS TRAVEL: 14.57 in
TABLE LENGTH: 19.69 in
TABLE WIDTH: 7.09 in
Y-AXIS TRAVEL: 6.89 in
X-AXIS TRAVEL: 11.02 in
T-SLOT SIZE/DISTANCE/QUANTITY: 0.47 in/2.48 in/3 in
HEIGHT: 33.85 in
LENGTH: 26.38 in
WIDTH: 21.65 in
WEIGHT: 227.08 lb

Palmgren's combination 11 inch bench engine lathe and
gear head mill delivers the precision, power and versatility
to handle a wide range of turning, milling and drilling
operations normally found in much larger machines.

Heavy cast iron construction, smooth power transmission with
precision thrust and ball bearings in the head stock and
spindles, hardened and ground ways all designed to go give
you years of trouble-free, precise turning, milling and hole
making machining. Built and inspected to the DIN 8606
toolmakers precision lathe standard assuring accuracy and
consistent performance.

The all gear drive transmission on the mill delivers full
power at any speed driving the cutting tools at nearly 100%
of available horsepower and torque.

With such a wide range of versatility and features, this
all-purpose combination lathe/mill is one of the most
function manual machine centers that can operate in all
types and sizes of shapes.

COMES WITH PALMGREN 3-YEAR FACTORY WARRANTY!

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com