Specifications:

Table To Spray Nozzle........................65"
Inside Side to Side..........................72"
Door Opening.................................63"
Table........................................57"
Motor........................................30 HP
Heat Source..................................Gas
Voltage......................................480 3 Phase 60 HZ, 71 FLA
Stainless Steel

Features & General Construction:
Closed Loop Zero Discharge.....................Standard
Wash Pump Suction Strainer.....................Standard
Adjustable Thermostat..........................Standard
Temperature Gauge..............................Standard
24 Hour 7 Day Clock............................Standard
Low Water System Shut-Off......................Standard
Door Safety Interlock..........................Standard
Wash Cycle Timer...............................Standard
Sheet Steel Cabinet Thickness..................7 Gal
230 V or 460 V 60 Hz, 3-Ph Controls............Standard
Automatic Water Level Control & Refill.........Standard

Power Blast Manifold:
OSCILLATING NON-SYNCHRONOUS
Angle of Oscillation...........................39 Degrees
Frequency of Oscillation.......................4 Per Minute
Number of Wash Nozzles.........................20
Type of Nozzle.................................Vee-Jet
Nozzle Material................................316 Stainless
Nozzle Spray Pattern...........................25 Degrees

Overall Dimensions:
Width ( Standard Unit )........................106 Inches
Depth ( Standard Unit )........................91 Inches
Height.........................................120 Inches
Empty Weight...................................6,850 Lbs
Reservoir Capacity.............................397 Gallons
Duplex Reservoir...............................Add 47 Gallons
Sludge Capacity................................80 Gallons

Work Area Dimensions:
Turntable Diameter.............................60 Inches
Work Height....................................75 Inches
Table Load Capacity............................4,000Lbs
Heavy Duty Capacity........................... 7,000Lbs

Heat System:
Operating Temperature..........................140-180 Degrees F
Initial Heat-Up Time...........................45-60 minutes
Element Size...................................60 kW

Electrical:
Motor Rating...................................Continuous Duty
Motor Starters.................................Across The Line
Enclosures.....................................TEFC
Short Circuit Protection.......................Standard
Enclosures.....................................NEMA 12
Overall Protection.............................Standard
Wiring Conduit.................................Flex Non-Metallic
Motor Type.....................................Industrial
Type of Conduit................................Liquidtight NEMA 12

Pump System & Performance:
High Efficiency, Rated for continuous duty (20 Start/hour without

overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller.

Note: All performance data taken at nozzle tip.

Standard:
30 Horsepower
Total System Flow...............................343 gpm
Flow per Nozzle.................................14.3 gpm
System Pressure.................................121 psi
Blast Velocity..................................133 ft/sec

*See attached Warranty, Terms, Machine Use and Safety.
**These specifications are subject to verification upon inspection.

Scott Machinery & Supply Inc
PO Box 430 Helena AL 35080-0430
Tel: 205-664-9644 Fax: 205-664-9796
Email (Request Quote): info@scottmach.com
Web: www.scottmach.com