General Specifications from Manufacturer
          
          Specifications - The MULTI MINI RHINOBAR utilizes a single tube, muzzle-loaded
          
          design with interchangeable three tube cartridge.  One cartridge of the
          
          customer selected sizes is included in the base MULTI MINI RHINOBAR price.
          
          The MULTI MINI RHINOBAR can accommodate bar stock up to 3/4" diameter by 6' or
          
          12' lengths.
          Overall length - 17'. For applications where space does not permit using a
          
          full  12' bar, a 6' bar model is available with overall length of 11'.
          
          The hydraulic system requires 15 gallons of Pennzoil AW-100 hydraulic oil or
          
          equivalent, which is supplied by the customer.  Pump motor - 1 hp, 220/440
          
          volts, 3 phase.
          
                 MULTI MINI RHINOBAR Features
           *Engineered for Swiss style CNC screw machines & small headstock lathes
           *Feed tube indexing in seconds
           *Standard Z axis capability
           *Positive, pusher retention system
           *Heavy duty construction for maximum rigidity and vibration prevention
           *Unique swing-out mechanism for ease of reloading bar stock 
           *Removable pendant for convenient operator control
          
          Quality and utility are the basis of the MULTI MINI RHINOBAR bar feed and no
          
          effort has been spared to insure that the end product will provide the service
          
          you require.
          
          All prices subject to change without notice*****
          
          
          MULTI MINI RHINOBAR Model MMRB .750-12'-----------------------------$15,750.00
          MULTI MINI RHINOBAR Model MMRB .750-6'------------------------------$15,750.00
          
          Additional Feed Tube Cartridges  priced as follows:
          
          1/4", 3/8", 1/2" ................................. $3,800.00
          1/4", 1/2", 5/8" ..................................$3,800.00
          3/8", 1/2", 3/4" ..................................$3,800.00
          Optional cartridge with 1 1/8" feed tube...........$4,630.00
          
          Optional Spindle Liners - Each spindle liner size is priced as follows:
          NOTE:  Prices based on Lathe Draw tube I.D., not stock size.
          1/4" to 3/4"...................................... $520.00 each
          
          NOTE:  All bar stock must have a 30 degree chamfer cut on the pusher end to
          
          achieve the highest performance.
          
          Optional Step Down Transformer for lathe applications that run on 
             440 Volts.......................................................... $475.00
          
          Custom Electrical Cable Package with plugs  
          THIS IS REQUIRED ON ALL BAR FEED-LATHE APPLICATIONS, WHETHER FIXED
           HEAD STOCK OR SWISS SLIDING HEAD STOCK MACHINES...................... $360.00
          
          Optional Front Mounted Safety Switch
           (For use on Swiss Screw Machine applications)........................ $550.00
          
          Warranty - One year, parts and workmanship
          
          Electrical Lathe Interface - Lathe must have programmable open & close of
          
          chuck and an appropriate interface provided by the lathe manufacturer. If an
          
          interface is not available, please contact Lexair and we will work with the
          
          lathe manufacturer or quote the cost to develop an interface where possible.
          
          Installation - The standard installation includes set-up and leveling of the
          
          bar feeder, alignment with lathe spindle and bolting to floor (bolts
          
          included), electrical connection to lathe, (interface supplied by builder),
          
          training and run-off of the bar feeder.
          
          Proper training and run-off depend on the lathe being operational, tooled and
          
          programmed, as well as stock and machine operator being available.
          
          Note: Additional time, travel and expenses caused by customer, dealer or OEM
          
          delays will be billed at $120 per hour on site, $60.00 per hour travel plus
          
          expenses.
          
          Installation by Lexair Personnel................................... $2,800.00
          
          Delivery - 12 to 15 working days
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com