SPECIFICATIONS:

CAPACITY:

BLADE @ 90:

18" (457 MM) HORIZONTAL

20" (560 MM) VERTICAL

BLADE @ 45:

18" (457 MM) HORIZONTAL

12.5" (324 MM) VERTICAL

SPEED RANGE:

50 - 450 FPM (15 - 137 M/MIN) INFINITELY VARIABLE SPEED DRIVE SYSTEM

REAR MOUNTED SPEED CONTROL:

ALLOWS BLADE SPEED TO BE ADJUSTED FROM OPERATOR'S CONTROL STATION

FEED RANGE:

0 - 140 LBS. (64 KGF) INFINITELY VARIABLE DIRECT READING SCALE BALANCE BEAM

T-SLOTTED WORK TABLE:

WORK AREA : 25" x 33" (616 MM X 838 MM)

TABLE HEIGHT 34.5" (876 MM)

(4) MACHINED T-SLOTS ACCEPT .625" (15.5 MM) T-BOLTS

MITER CUTTING:

COLUMN AND BLADE TILT UP TO 45 RIGHT AND LEFT OF VERTICAL; WORK ALWAYS

STATIONARY. BUILT-IN PROTRACTOR.

AUTOMATIC STOPS:

ADJUSTABLE STOPS CAN BE PRE-SET TO STOP ADVANCE AND RETURN OF BLADE, AND ALSO

TO STOP MOTOR AT ANY LOCATION WITHIN THE 18" (457 MM) TRAVEL OF THE BLADE.

COOLANT SYSTEM:

CONTROLLED BY ON-OFF SELECTOR SWITCH AT OPERATOR'S STATION. TANK CAPACITY 21

GALLONS

POWER CHIP BRUSH:

TOGETHER WITH BLADE WIPERS AND FLOOD COOLANT DEEP BLADE TEETH FREE OF CHIPS.

CARBIDE GUIDE SYSTEM:

UPPER AND LOWER GUIDES HAVE PRELOADED CARBIDE FACED BACK-UP BLOCKS TO SUPPORT

BACK EDGE OF BLADE.

BLADE: 14' 6" L x 1" W x .035" THICK

MOTORS:

MAIN:

2 HP(1.5 KW) 1800 RPM, TOTALLY ENCLOSED FAN COOLED, 240/480, 3 PHASE, 60 HZ

COOLANT PUMP:

1/4 HP, 3600 RPM TOTALLY ENCLOSED MOTOR-BUILT-IN INTEGRALLY 240/480, 3 PHASE,

60 HZ

MACHINE WEIGHT: 2,650 LBS(Approx)

Overall Size: 84"L x 58"W x 90"H(Approx)

EQUIPMENT INCLUDED:

WORK LAMP


**** These specifications are subject to verification upon inspection.
**** See attached Warranty, Terms, Machine Use and Safety.
**** Sold as is

Scott Machinery & Supply Inc
PO Box 430 Helena AL 35080-0430
Tel: 205-664-9644 Fax: 205-664-9796
Email (Request Quote): info@scottmach.com
Web: www.scottmach.com