Specifications Are From OEM Brochure And Equipped With Items Are Described To
           The Best Of Our Knowledge. ALL Items Below Should Be Confirmed Buy Buyer.
           
           Equipped With:
              MAZATROL PC-FUSION-CNC 640MT PRO CNC 
              PCMCIA Interface (2 Slot, Card Bus)
              Network Interface (For LAN & Modem)
              KM Tool Magazine (Upper Turret)
              213 PSI Thru Mill Head
              C-Axis 0.0001 Degree Incr. 1st Spindle
              8" Thru-Hole Chuck Main Spindle
              40 KM-Tool Magazine
              B-Axis Index 5 Degree (Coupling clamp)
              Chip Conveyor Side Disposal Hinge Type
              Chip Blaster
              213PSI thru/Flood Coolant Upper Turret  (71 PSi Lower)
              Performance CNC Optional Pkg (640MT Pro)
              3.5" FDD Unit
              Y-Axis Control
              Coolant Through Milling Head (UP Turret)
              Parts Catcher
              2nd Spindle C-Axis 0.0001 Degree Increment
              8" Thru-Hole Chuck 2nd Spindle Non-Thru Cyl
              B-Axis 0.0001 Deg. Incr. N/A Contouring
              Lower 9 Position Drum Turret 
              Automatic Tool Eye
              1KG Flood Coolant Lower Turret
           
           Specifications:
           Maximum Swing:                            26"
           Maximum Swing over Carriage:              19.7" - 26"
               NOTE: Depends upon workpiece length,tool magazine type and Y axis position
           Maximum Cutting Diameter: Chucking:       26"
           Maximum Cutting Length:                   40"
           Maximum Distance Between Chuck Faces:     41.14"
           
           MAIN SPINDLE SPECIFICATIONS (L):
           Spindle Nose:                             A2-6
           Spindle Bore:                             2.99"
           Maximum Bar Work:                         2"
           Spindle Speed/Ranges:                     35 - 5000 RPM / 2
           Spindle Index (Programmable):             0.0001 Degree
           Spindle Horsepower (Cont./30 Mins.):      20/30 H.P. (A.C.)
           Spindle Torque:                           258.1 ft-lbs
           
           SECOND SPINDLE SPECIFICATIONS (R)
           Spindle Nose:                             A2-6
           Spindle Bore:                             2.99"
           Maximum Bar Work:                         2"x 34.6" deep from
           Spindle Speed/Ranges:                     35 - 5000 RPM / 2
           Spindle Index (Programmable):             0.001 Degree
           Spindle Horsepower (Cont./30 Min.):       20/25 HP (A.C.)
           Spindle Torque:                           241 ft-lbs
           
           UPPER TURRET AND TOOLING SPECIFICATIONS
           Type of Turret:                           1 Position, w/ATC
           Magazine Capacity:                        40 Tools
           Tool Selection Method:                    Random
           Max. Tool Dia. w/All Pockets Full:        3.54"
           Max. Tool Dia. w/Adjacent Pockets Empty:  4.92"
           Max. Tool Length (From Gage-Line):        11.8"
           Maximum Swing:                            26"
           Maximum Swing over Carriage:              19.7" - 26"
               NOTE: Depends upon workpiece length,tool magazine type and Y axis position
           Maximum Cutting Diameter: Chucking:       26"
           Maximum Cutting Length:                   40"
           Maximum Distance Between Chuck Faces:     41.14"
           
           MAIN SPINDLE SPECIFICATIONS (L)
           Spindle Nose:                             A2-6
           Spindle Bore:                             2.99"
           Maximum Bar Work:                         2"
           Spindle Speed/Ranges:                     35 - 5000 RPM / 2
           Spindle Index (Programmable):             0.0001 Degree
           Spindle Horsepower (Cont./30 Mins.):      20/30 H.P. (A.C.)
           Spindle Torque:                           258.1 ft-lbs
           
           SECOND SPINDLE SPECIFICATIONS (R)
           Spindle Nose:                             A2-6
           Spindle Bore:                             2.99"
           Maximum Bar Work:                         2"x 34.6" deep from
           Spindle Speed/Ranges:                     35 - 5000 RPM / 2
           Spindle Index (Programmable):             0.001 Degree
           Spindle Horsepower (Cont./30 Min.):       20/25 HP (A.C.)
           Spindle Torque:                           241 ft-lbs
           
           UPPER TURRET AND TOOLING SPECIFICATIONS:
           Type of Turret:                           1 Position, w/ATC
           Magazine Capacity:                        40 Tools
           Tool Selection Method:                    Random
           Max. Tool Dia. w/All Pockets Full:        3.54"
           Max. Tool Dia. w/Adjacent Pockets Empty:  4.92"
           Max. Tool Length (From Gage-Line):        11.8"
           
           
           
           
           

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): mike@automatics.com
Web: www.automatics.com