Featuring:
             Class-7 Super Precision Fafnir Spindle Bearings
             5-Horsepower Variable Speed Head
             80 - 4,000 RPM Spindle  Speeds (5,000 RPM Inverter Spindle Optional)
             Square Box Ways on Knee & Column - Y & Z Axis
             1.5-Horsepower Knee Power Feed Motor
             Automatic Lubrication System for Slideways and Leadscrews
             Hard-Chrome Plated Quill
             40-Taper Spindle
             1-Year Warranty
           
           General Specifications As Per Brochure (must be verified by buyer):
           
           STANDARD GANESH GMV-4 MACHINE SPECIFICATIONS:
           
           
           TABLE:
           Table Size:                             12" X 54" (254mm X 1372mm)
           Table Travel / (With Power Feed):       36" (914mm) / 32" (812mm)
           Table Capacity:                         1200 lbs
           T-slot width (3 Ground T-Slots):        5/8" with ground reference edges
                                                   (15.9mm wide)
             
           MACHINE TRAVELS & CAPACITY
           Table Travel - X axis/(With Power Feed):36" (914mm) / 32" (812mm)
           Cross Travel - Y axis:                  16" (400mm)
           Knee Travel - Z axis:                   16" (406mm)
           Ram Travel:                             17.7" (450mm)
           Spindle Nose-to-Table TravelL:          2" - 18" (50 - 457mm)
           Quill Travel - Manual & Power Feed:     5" (127mm)
           Quill feeds - With Trip Release:        0.0015", 0.003", 0.006" (0.038mm
                                                   0.076mm, 0.152mm) 
           Quill Diameter:                         4.13" (105mm)
           Leadscrews with ground pitch (X & Y):   200" per rev. (5mm) (ballscrews
                                                   available)
           Adjustable scale ring resolution:       0.001" (0.0254mm)
           
           Slide Ways:                             Hardened & Ground Meehanite Cast Iron
           Longitudinal Table - Z Axis:            Hardened & ground dovetail ways
           Cross Slide to Knee - Y Axis:           Hardened & ground square box ways
           Knee to Column - Z Axis:                Hardened & ground square box ways
           
           SPINDLE HEAD
           
           Head tilt (Left-to-Right):              90 - 0 - 90 degrees
           Head tilt (Front-to-Back / Up-Down):    45 - 0 - 45 degrees
           Head Swivel:                            360-degrees
           Spindle Motor:                          5-HP, 3-Phase 208-240 vac 
                                                   (5-HP option)
           Spindle Taper:                          40-taper 
           Spindle Runout:                         0.0002" maximum runout (0.005mm)
           Spindle Bearings:                       Fafnir ABEC-7 matched set of 
                                                   Class-7 bearings
           Variable Speed Drive - Dual Range:      80 - 520 rpm (low-range) / 
                                                   600 -4000 rpm (high-range)
           
           Note: 5,000-RPM Electronic Variable-Speed Spindle available with the optional
           
           AC Inverter Spindle Head
           
           DIMENSIONS & WEIGHT
           Power Requirements:                     3-Phase 220 vac @ 44-amps 
                                                   (440 vac optional)
           Coolant Capacity:                       11-Gallons (41 liters)
           Machine weight:                         3528 lbs
           
           THESE BASIC ACCESSORIES ARE INCLUDED WITH EACH MACHINE - A $3,500 VALUE
           Motorized Knee Power Feed               $1,295  Value
           Spring Loaded Way Covers                $  495  Value
           2-Cooling Fans in Spindle Head          $  395  Value
           Halogen Work Light                      $  395  Value
           Automatic Lubrication System            $  295  Value
           Coolant Pump & Nozzle                   $  495  Value
           Coolant & Chip Tray                     $  295  Value
           (Hi-Torque 1.5-HP knee powerfeed included with each machine)
           
           For full quote with option list & pricing details, etc, please open the
           attached pdf file.
           
           
           
           
           

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com