0W2100
WASHING (CONTINUOUS)
24" W x 12" H MIDBROOK 3-Stage Belt Washer, Elect Heated Wash/Rinse, Regen B/O
Ref:
53051
AGE: 2001
MODEL NUMBER: 5024W/R/BO
SPECIFICATIONS:
Stainless Steel Construction
Belt Width: 24"
Currently divided into (3) lanes, but can be
easily removed for full 24" use
Load Height, Max.: 12"
Load / Unload Height Floor to Top of Conveyor Belt : 36"
18" Loading Length
6' Wash:
(2) 480 Volt Lufran, 48kW Each
Drop-In Electic Heaters
472 Gallon Tank:
(2) 5 HP Pumps
(1) 20 HP High Pressure Pump
(4) Rows of Top, Sides & Bottom Nozzles
(2) Inline Superior Stainless Steel Filters
7" with 2" Outlet
with 50, 100, or 200 Micron Filter Bag
Removable Chip Basket
(3) Pump Screens
Multi-Level Float Switch
145 Degree Operating Temperature
4' Rinse:
480 Volt Lufran, 48kW
Drop-In Electric Heater
283 Gallon Tank:
3 HP Pump
(2) Rows of Top, Sides, & Bottom Nozzles
(2) Inline Superior Stainless Steel Filters
7" with 1-1/2" Outlet
50, 100m or 200 Micron Filter Bag
Removable Chip Basket
Pump Screen
Multi-Level Float Switch
145 Degree Operating Temperature
4' Regen Blow-Off, 18 HP Gast, 600 CFM @ 2 PSI
EQUIPPED WITH:
1" x 1" x 24" Standard Stainless Steel Flatwire Conveyor
18" Diameter Clean-Out Door, Each Tank
Suparator Model 240/001 with Suparskim that Separates Oil
from Wash Fluid, Water Content in the Removed Oil is
Reduced to Less Than 1%
Upgraded with Top-Mounted Mist Removal with a 5 HP Blower
Lift-Off Access Doors, Both Sides, Tunnel and Tanks
10 Ga. Stainless Steel Tank
Low Solution Level Detection
NOTE:
The installation shown in the photos show a cool air
intake from the ceiling to mix with wash chamber air
to reduce air temperature going into the mist remover.
This helps precipitate the water from the incoming air
from the inside of the washer.
CURRENT REPLACEMENT COST PER MANUFACTURER IS $260,000
OVERALL DIMENSIONS: 142" W x 205" L x 150" (Est.) with
Mist Exhaust Top Discharge Attached
SHIPPING DIMENSIONS: 108" W x 205" L
105" (Est.) High with Mist Collector
85" (Est.) High without Mist Collector
Bass Machinery
2100 Hendon St
Toledo OH 43606-4543
Tel:
419-243-2277
Fax:
330-299-0520
Email (Request Quote):
sales@bassmachinery.com
Web:
www.bassmachinery.com
|